Bi-component polyester spunbond technology is used to extrude filaments in two different cross-sectional geometries; (1) round core and sheath and (2) tipped trilobal.

Buffalo Round Core and Sheath:Core is PET and sheath is CoPET 
Buffalo Tipped Trilobal (TCS):Core is PET and the lobes’ tips are CoPET    

The presence of the lower melt temperature CoPET in the filaments allows good fiber-to-fiber bonding.  When compared to standard flat bonded PET spunbond, Buffalo exhibits higher CD tensile strength, abrasion resistance and internal bonding.  Mogul Buffalo bi-component PET is a unique and premium product because of limited industry technology and a very limited number of suppliers. 

The Polyester resins as received by Mogul meet food contact regulations for FDA 21CFR-1771630

 
Coated, Treated, Laminated Fabrics and Film

Filtration


LINE SPECS

To view line specs please enter given password.

Core sizes : 2”, 3”, 4”, 5”, 6’’ and 7” (51, 76, 102, 127, 152 and 178 mm)
Fabric Maximum Width : 3600 mm (142’’)
Buffalo Core & Sheath Flat Bond : 17-150 gsm (0,50-4,4 oz/sqyd)
Buffalo TCS Flat Bond : 17-150 gsm (0.44-5.8 oz/sqyd)
FF Buffalo Core & Sheath Flat Bond : 3-4 denier
Trilobal (TCS) Flat Bond : 4-6 denier
Max roll outer diameter : 1150 mm (47”)

MARKETS

BEVERAGE FILTERS

LABELS

AIR FILTRATION

POOL AND SPA FILTERS

FIBER GLASS SCRIM BACKING

BATTERY SEPERATORS

COMPOSITES

WALL COVERINGS

WINDOW BLINDS

DRYER SHEETS

LIQUID FILTRATION (COOLANTS, LUBRICANTS, ETC)

LARGE FORMAT PRINTING FOR SIGNS AND ADVERTISING

SUPPORT LAYES FOR COMPOSITES AND NANO COATING

SUBSTRATES FOR FOAM TREATMENT, LAMINATION AND COATING

INTERIOR SURFACES (INTERIOR TRIMS, SEATING, MOULD PARTS, TRUNK LINERS)

Copyright © Mogul Co., Ltd.